manualshive.com logo in svg

YOKOGAWA ScopeCorder DL350, Руководство по началу работы, Страница: 54 / 220

Поделиться
Скачать
YOKOGAWA ScopeCorder DL350 Скачать руководство пользователя страница 54

2-21

IM DL350-03EN

Making Preparations for Measurements

1 

2 

3 

4 

5 

6 

App

Index

2.9  Turning the Power On and Off

Before Turning On the Power, Check That:

•  The instrument is installed properly. See section 2.2, “Appropriate Locations for Using the 

Instrument.”

•  The battery pack is installed properly if you are using the battery pack to run the instrument. See 

section 2.5, “Loading, Removing, and Charging the Battery Pack.”

•  Check that the power cord is connected properly if you are using the AC adapter or DC power 

supply to run the instrument. See section 2.6, “Connecting the AC Adapter,” or 2.7, “Connecting the 
DC Power Supply.”

Turning the Power On

Press the power switch on the instrument’s front panel. When the instrument starts normally, the power 
switch lights, and the top screen appears.

  

Power switch

Solid

: Running

CHARGE LED

Solid

: Charging

Off

: 

Charging complete or battery not connected

Blinking

: Running on battery but low battery level

Power Supply Status Display

The status of the power supply in use is displayed at the top of the screen.

  

Battery pack power level

Connected to DC power

Battery charging

Battery Status Display

•  The battery level is indicated at the top of the screen with an estimated battery charge level (%). 

Use the battery level as a rough guideline.

•  When the battery level falls to 9%, a warning message will appear.

•  When the battery voltage decreases due to low temperature or other reason, a warning message 

will appear, and the battery level will indicate LOW.

•  When there is no more battery power, a warning message will appear, and the power will be turned 

off. If an SD card is inserted, measured data is saved before the power is turned off.

•  When the battery level is low or the voltage is low, connect the AC adapter or DC power cable to 

supply power.

 CAUTION

Turning the instrument off while the instrument is saving data may damage the media on 
which data is being saved. Also, the data being saved is not guaranteed. Always turn the 
power switch off after data has been saved.

Содержание ScopeCorder DL350





























































































































































































































Отзывы:

Нет отзывов