manualshive.com logo in svg

YOKOGAWA ScopeCorder DL350, Руководство по началу работы, Страница: 34 / 220

Поделиться
Скачать
YOKOGAWA ScopeCorder DL350 Скачать руководство пользователя страница 34

2-1

IM DL350-03EN

Making Preparations for Measurements

1 

2 

3 

4 

5 

6 

App

Index

Chapter 2 

Making Preparations for Measurements

2.1  Handling Precautions

Safety Precautions

If you are using this instrument for the first time, make sure to thoroughly read the safety precautions 
given on page xii.

Do Not Remove the Case

Do not remove the case from the instrument. Some parts of the instrument use high voltages and 
are extremely dangerous. For internal inspection and adjustment, contact your nearest YOKOGAWA 
dealer.

Unplug If Abnormal Behavior Occurs

If you notice smoke or unusual odors coming from the instrument, immediately turn off the power and 
unplug the power cord. Then, contact your nearest YOKOGAWA dealer.

Use the AC Adapter and Power Cord Correctly

Do not place objects on top of the AC adapter or power cord, and keep them away from heat sources. 
When unplugging the power cord from the outlet, do not pull on the cord. Pull from the plug.

General Handling Precautions

Do Not Place Objects on Top of the Instrument

Never place other instruments or objects containing water on top of the instrument, otherwise a 
breakdown may occur.

Do Not Apply Shock or Vibration

Do not apply shock or vibration. Doing so may damage the instrument. Applying shock to the input 
connectors, probes, and the like, can cause electrical noise to enter the instrument through the signal 
lines.

Do Not Damage the LCD

Because the LCD is very vulnerable and can be easily scratched, do not allow any sharp objects near 
it. Also it should not be exposed to vibrations and shocks.

Unplug during Extended Non-Use

•  Unplug the power cord of the AC adapter from the outlet.
•  Remove the battery pack from the main unit.

Содержание ScopeCorder DL350





























































































































































































































Отзывы:

Нет отзывов