6-41
IM DL35O-03EN
Specifications
1
2
3
4
5
6
App
Index
CAN & LIN Bus Monitor Module (720241)
Item
Specifications
Standard operating conditions
Ambient temperature: 23 to 5°C
Ambient humidity:
20 to 80% RH
Number of input ports
CAN port: 1. LIN port: 1.
Maximum sample rate
100 kS/s
Input format
Isolated unbalanced
CAN port
Item
Specifications
Maximum input voltage
−3 V to +10 V (between CAN_H and GND or CAN_L and GND)
Maximum rated voltage to ground
Between input and case
Between inputs
42 V (DC + ACpeak) (CAT II, 30 Vrms)
Input connector
D-sub 9 pin (male)
Terminator
Internal. Can be enabled or disabled for each port
Terminator resistance
(when the terminator is enabled)
110 to 130 Ω
LED display
Illuminates to indicate that the terminator is enabled
Supported protocols
Physical layer: ISO-11898 (High Speed Communication)
Supported bit rates
1
10 kbps, 20 kbps, 33.3 kbps, 50 kbps, 62.5 kbps, 66.7 kbps, 83.3 kbps, 100 kbps,
125 kbps, 250 kbps, 500 kbps, 800 kbps, 1Mbps
Supported data length
4 bytes maximum
Number of sub channels
60 sub channels
One shot output
Frames can be output in single shots.
A/D converter resolution
(when Value Type is set to Float)
16 bits, 2400 LSB/div
1 Low-speed CAN at low-speed transceiver levels is not supported.
LIN port
Item
Specifications
Maximum input voltage
−0.3 V to +18 V (between LIN.VBAT and GND)
Maximum rated voltage to ground
Between input and case
Between inputs
30 Vrms (CAT II)
Input connector
D-sub 9 pin (male)
Supported protocols
Physical layer: Complies with ISO9141
Supported bit rates
2400 bps, 9600 bps, 19200 bps
Supported data length
4 bytes maximum
Number of sub channels
60 sub channels
Supported check sums
Standard check sum, extended check sum
6.13 Module Specifications