YOKOGAWA ScopeCorder DL350 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 220

YOKOGAWA ScopeCorder DL350 Скачать руководство пользователя страница 38

2-5

IM DL350-03EN

Making Preparations for Measurements

1

2

3

4

5

6

App

Index

2.2 Appropriate Locations for Using the Instrument

Installation Orientation

Install the instrument so that it is flat or with the rear panel facing down. When using the stand, push it
out until it locks into place. Push the stand back in when you store the instrument.

Stand

Stand support

Battery

WARNING

• When you put away the stand, be careful not to get your hand caught between the stand

and the instrument.

• Handling the stand without firmly supporting the instrument can be dangerous. Please take

the following precautions.
• Only handle the stand when the instrument is on a stable surface.
• Do not handle the stand when the instrument is tilted.

• Do not place the instrument in any position other than those shown in the above figures.

Also, do not stack the instrument.

CAUTION

Do not apply excessive force or shock to the stand. Doing so may break the stand support.

French

AVERTISSEMENT

• Lorsque vous rabattez le support, veillez à ne pas vous coincer la main entre le support et

l’instrument.

• Lorsque vous manipulez le support, soutenez toujours l’instrument fermement. Prenez les

précautions suivantes.

  •  Ne manipulez le support que lorsque l’instrument est placé sur une surface stable.
  •  Ne manipulez pas le support lorsque l’instrument est incliné.
•  Ne pas placer l’instrument dans des positions autres celles indiquées ci-dessus. Ne pas

empiler l’instrument.

ATTENTION

Évitez d’appliquer une force excessive ou des chocs sur le support. Le système de soutien du
support peut se casser.

«
...
36
37
38
39
40
...
»

Содержание ScopeCorder DL350





























































































































































































































Отзывы:

Нет отзывов