5-4
IM DL350-03EN
Network Errors
Code
Message
Chapter or
Section
600
Unable to connect to the server.
Check the network settings and configuration.
Chapter 19
601
Has not connect with ftp server yet.
Confirm the network settings and connection.
Chapter 19
602
This ftp function in not supported.
–
603
FTP Error: Client Handle
Confirm the network settings and connection.
Chapter 19
605
Cannot send a mail.
Confirm the network settings and connection.
Chapter 19
608
Failed to acquire time from SNTP server.
Confirm the network settings and connection.
Chapter 19
Execution Errors (650 to 799)
Code
Message
Chapter or
Section
650
Data is invalid.
–
653
Can not be executed while running.
Press START/STOP key to stop acquisition.
–
654
Cannot manipulate files while image printing is in progress.
Wait until image printing is complete.
–
656
Calibration failure.
Disconnect the input and execute again.
If it fails again, servicing is necessary.
–
657
SD Card recording is valid when the sampling rate is slower than the values shown below.
1CH : 1MS/s(1us)
2CH : 500kS/s(2us),
3 - 5CH : 200kS/s(5us)
6 - 10CH : 100kS/s(10us)
–
661
Balancing failed.
–
664
Go-Nogo is available while Trigger Mode is
- ‘Single’ or ‘Normal’
- ‘Auto’ (Faster than 50ms/div)
4.1,
1
chapter 13
1
666
Failed to measure statistics.
Waveform data may be missing.
If Cycle Statistics is specified, the instrument may be configured in a way that fails to detect the cycle.
8.3
1
667
Executing file access.
Abort or wait until it is complete.
–
668
Image is being printed or saved.
Wait until the execution of the command is complete.
–
669
Cannot be executed when the action mode is ON.
3.1,
1
3.2
1
671
Cannot be executed when a SD Card recording is ON.
3.1,
1
3.2
1
672
Cannot be executed when the time base setting is to be an External clock.
3.1,
1
3.2
1
673
Because there are too many channels, it can’t start in the length of the present record.
Chapter 2
1
674
Average practice can’t be done because the record length of the history exceeds the record length that it
can be carried out.
Chapter 17
1
675
Average practice can’t be done because the record length of the history exceeds the record length that it
can be carried out.
Chapter 17
1
676
Set the trigger mode to On Start for SD Card recording.
4.1
1
677
Cannot do while selftest is executing.
5.3
679
Cannot start at the current record length.
Shorten the record length or meet the following condition.
* Set the trigger mode to Auto, decrease T/Div to less than 100 msec/div to enable roll mode.
* Set the trigger mode to Single or On Start.
3.1,
1
4.1
1
680
Averaging mode is not possible when the trigger mode is Single or On Start.
Change the trigger mode.
4.1
1
684
Cannot start when the time base set to external clock while Acq. Mode set to envelope.
3.1
1
685
Cannot start when roll mode display while accumulate mode set to ON.
Turn Off accumulate.
5.3
1
5.2 Messages and Corrective Actions
1 User’s Manual, IM DL350-02EN