YOKOGAWA ScopeCorder DL350 Скачать руководство пользователя страница 130

Страница: 130 / 220

5-7

IM DL350-03EN

Troubleshooting, Maintenance, and Inspection

App

Index

Code

Message

Chapter or

Section

850

Cannot be set when the trace is set to a frequency module.

–

852

Cannot set Math to OFF while FFT Window ON.

10.1

853

Cannot select this trace because it already selected.

–

854

Because a record length is too long, it can't be set up by the present number of indication channels.

Chapter 2,

3.1

855

Cannot change to such Record length while running.

Set the trigger mode to Auto and decrease T/Div to less than 100 msec/div to enable roll mode, or set

the trigger mode to Single or On Start.

–

856

Cannot Display setting to On.

This CH didn't acquisition to memory.

Chapter 2

858

Cannot set while action mode is on.

3.1

868

Cannot be specified because characters in the JIS level-2 kanji set are included.

Create the file on the local drive, and then copy it to the network drive.

–

869

Cannot set while Go-Nogo mode.

Turn Off Go-Nogo mode first.

Chapter 13

870

All sub-channel inputs are off.

At least one inputs should on.

2.3,

2.5

871

No effective channel for Math Setup.

–

875

Cannot change or START when accumulate is ON.

Turn OFF accumulate first.

5.3

879

Cannot set GoNogo mode while Math or FFT Window is On.

Chapter 9,

chapter 10

881

Cannot set for CH which ValueType is Float while running.

–

883

Cannot set Input to ON with limit of memory capacity.

2.10,

2.11,

2.12

885

Zoom rate is limited while installed a module which has sub-channels.

–

890

LIN Monitor does not support Float data.

2.11

892

Cannot set Math operation while FFT window is open.

10.1

893

Cannot set that item.

It cannot be measured for Logic module.

8.1

894

Cannot set DC Offset Cancel to ON due to following case.

- Coupling is not DC.

- Not execute DC Offset Cancel.

2.2,

3.6

895

The password entered the first time is different from the password entered the second time.

Reenter the password for the second time.

–

896

It is not possible to set the subchannel sample interval to be 1 second or more.

(sample rate to be 1S/s or less.)

3.1,

3.2

897

This function cannot be used when

the recorder mode is set.

–

898

Cannot change when Internal Clock is active.

–

1 User’s Manual, IM DL350-02EN

2 Features Guide, IM DL350-01EN

5.2 Messages and Corrective Actions

Содержание ScopeCorder DL350





























































































































































































































Результаты поиска

Содержание ScopeCorder DL350

Отзывы:

YOKOGAWA ScopeCorder DL350, Руководство по началу работы, Страница: 130 / 220

Результаты поиска

Содержание ScopeCorder DL350

Отзывы: