YOKOGAWA FLXA402 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 93

background image

iv

IM 12A01F01-03EN 2nd Edition : Feb. 19, 2019-00

Changes Copyright (C) 1996 by Andrey A. Chernov, Moscow, Russia.
Version: 1.0
This software may be used, modified, copied, distributed, and sold, in both source and binary

form provided that the above copyright and these terms are retained. Under no circumstances

is the author responsible for the proper functioning of this software, nor does the author assume

any responsibility for damages incurred with its use.

l

Adobe-Helvetica

ISO10646-1 extension by Markus Kuhn <[email protected]>, 2001-03-20
Copyright 1984-1989, 1994 Adobe Systems Incorporated.
Copyright 1988, 1994 Digital Equipment Corporation.
Adobe is a trademark of Adobe Systems Incorporated which may be registered in certain

jurisdictions.
Permission to use these trademarks is hereby granted only in association with the images

described in this file.
Permission to use, copy, modify, distribute and sell this software and its documentation for any

purpose and without fee is hereby granted, provided that the above copyright notices appear in

all copies and that both those copyright notices and this permission notice appear in supporting

documentation, and that the names of Adobe Systems and Digital Equipment Corporation not be

used in advertising or publicity pertaining to distribution of the software without specific, written

prior permission. Adobe Systems and Digital Equipment Corporation make no representations

about the suitability of this software for any purpose. It is provided "as is" without express or

implied warranty.

l

Ayu 20dots Gothic Version 1.7 (Mar.5,2004)

Ayu 20dots Gothic Version 1.7 (Mar.5,2004).
This font is designed for subset of Kochi-Gothic, and many glyphs are based on Kappa 20 dots

fonts created by KANOU Hiroki ([email protected]).
For more information, see http://x-tt.sourceforge.jp/ayu.html
THIS FONT IS PUBLIC DOMAIN: YOU CAN USE, COPY, MODIFY, EVEN COPYRIGHT

AS YOURS AND SELL THIS FONT, BUT YOU CAN'T PROHIBIT ANYONE FROM FREE

CIRCULATION OF THIS FONT AND ITS DESCENDANTS INDEPENDENT OF YOUR

VARIATIONS AND/OR DERIVATIONS.

l

Shinonome 16 dot fonts

public domain
Shinonome 16 dot fonts

JISX0208.1983/1990

Designed by Yasuyuki Furukawa <[email protected]>, 2000
NOTE: Some characters of XFree86 "jiskanji16" are included as sign's design pattern.

«
...
3
4
5
6
7
...
»

Содержание FLXA402






























































































Отзывы:

Нет отзывов

Похожие инструкции для FLXA402

Бренд: ACS Страницы: 56

Бренд: Perun Airsoft Страницы: 10

Бренд: FEDERAL PACIFIC Страницы: 12

Bernardo 1320 S

Бренд: PWA Страницы: 12

Бренд: Sommer & Maca Industries Страницы: 44

Бренд: Advantech Страницы: 75

AEROLYTE PRN 6060-A

Бренд: Zero Страницы: 33

Бренд: TE Connectivity Страницы: 65

Бренд: ITI Страницы: 42

Бренд: S&H Industries Страницы: 9

Бренд: Yli Electronic Страницы: 2

Бренд: V.ORLANDI Страницы: 32

Бренд: Mono Страницы: 40

ECN-360A-ULT3-C/4G-R10

Бренд: IEI Technology Страницы: 131

Бренд: FabiaTech Страницы: 69

Бренд: YZ Systems Страницы: 106

Бренд: Eneo Страницы: 26

Бренд: hager Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды