<4. Setting converter>
4-1
IM 12A01F01-03EN 2nd Edition : Feb. 19, 2019-00
4. Setting Converter
We recommend that you write down parameters on “User Setting Table” we provide and keep it
for future use.
You can download “User Setting Table” from our website.
http://www.yokogawa.com/an/flxa402/download/
Home/Main > “Menu” > Converter menu > “Setting”> Converter settings
When you go to Converter settings, mA output is in HOLD and Contact output keeps the status.
This stays on for 3 seconds after you exit the converter setting screen.
Sec. 4.1
Sec. 4.2
Sec. 4.3
Sec. 4.4
Sec. 4.5
Sec. 4.6
Sec. 4.7
Sec. 4.8
Figure 4.1
Converter settings (sample image)
Refer to corresponding sections to change a parameter. If you set wrong parameter, set it back to
the previous value or setting and try the configuration again.
Some parameters have symbols on the right side, such as (A). This symbol represents the
application of the parameter. The change of these parameters with the symbols does not affect
the operation if they do not correspond to Model code or application.
Figure 4.2
Parameter with symbols (sample)
