<4. Setting converter>
4-3
IM 12A01F01-03EN 2nd Edition : Feb. 19, 2019-00
If the setting has problem, such as out-of-range setting, tapping locates the item with problem
being highlighted in yellow. Even after you move to upper layer by tapping “<” key, you will see
the corresponding item in yellow, which makes you easy to go back to the parameter concerned.
Check the problem and edit the value again.
変更
Figure 4.4
Chart flow at Converter settings-wrong value input
When you first startup the converter, you will see default parameters on screen. Set parameters
according to the combination or application you need. See Table 4.3.
Find default value or setting range in “User setting table”.
We recommend that you download “User setting table” and fill in the user setting value, after you
change parameters without any error.
You can save all configuration at a time by going to
“Others menu”> “Save/Load”> “Save configuration” (see 5.1.3 Save configuration )
You can export the data to SD card memory, too. (see 5.1.8
Create password to protect the configuration of “Setting. After creating the password, keep it
