<3. Converter menu>
3-3
IM 12A01F01-03EN 2nd Edition : Feb. 19, 2019-00
n
mA output
For setting mA output, go to
> Converter menu > “Setting” > “Converter settings” > “mA output settings” >
“mA1/2/3/4”
See 4.3 mA output settings for further information.
mA output in HOLD shows “HOLD.”
Alarms
, , ,
indicate the device status in trouble related to mA output.
When mA input/output is “-A2”, mA3 and mA4 are displayed in gray “-------.”
n
Contact output
Displays S1 to S4, “Contact output.”
For setting of contacts or parameters, go to
> Converter menu > “Setting” > “Converter settings” > “Contact output” > “S1/S2/S3/
S4”
For further information, see 4.4 Contact output settings.
When the suffix code includes "-NR" (Without Contact outputs), the contact output is not
displayed.
n
mA/Contact input
Shows analog input (mA).
For mA input, go to
> Converter menu > “Setting” > “Converter settings” > “mA input settings (Ad)”
For further information see 4.1 mA input setting (Ad).
When mA input/output is “-A2”, AI is displayed in gray “-------.”
Contact input status is defined NC: Normal Close / NO: Normal Open.
For Contact input setting, go to
> “Converter setting” > Contact input setting
When mA input/output is "-A2", DI2 is displayed in gray “-------.”
n
Product information 1
“Serial No.”
Housing serial number,
MS Code
Model and suffix code
n
Product information 2
Sensor serial number,
“Internal serial No.” (“Housing”, “First sensor module”, “Second sensor module”, “IO module”,
“COM module
“Revision” “Software Revision” “Bluetooth Device Revision”.
Scroll the page of Ethernet information with
.
"----" represents blank, or "not available."
NOTE
When Optical DO Sensor is connected, Device no. of the sensor is displayed. No serial number
is displayed.
