YOKOGAWA FG420 Скачать руководство пользователя

Страница: 58 / 180

IM FG410-01EN

4. BASIC OPERATION

Remote setting [Remote]

Selects GPIB/USB and sets the GPIB address. The USB ID is also displayed.



“8.1 Selecting

Remote Interface [Remote]” in the Application Instruction Manual.

Display setting [Display]

Sets the backlight of the display.



“8.2 Display Settings [Display]” in the Application Instruction

Manual.

If the display contents are invisible for the backlight out, press on the

MENU

MENU key for a while

to light up the backlight forcibly.

Modify direction setting [Modify Direction]

Sets the movement direction when the modify knob is turned.



“8.3 Modify Knob and Modify

Direction Setting [Modify Direction]” in the Application Instruction Manual.

Operation sound setting [Sound]

Sets the operation sound.



“8.4 Operation Sound Setting [Sound]” in the Application Instruction

Manual.

Self-check [Self Check]

Performs internal status check.



“8.5 Self Check [Self Check]” in the Application Instruction

Manual.

Internal information display [Information]

Displays the firmware version and latest calibration date.



“8.6 Product Information Display

[Information]” in the Application Instruction Manual.

Channel mode setting [Channel Mode] (FG420 only)

Sets the type of 2-channel ganged operation. Independent, 2-phase, constant frequency difference,

constant frequency ratio, and differential output can be selected from.



“3.4 Maintaining Both

Channels to Same Frequency (2-Channel Ganged Operation, 2-Phase)”, “3.5 Keeping Frequency

Difference Constant (2-Channel Ganged Operation, 2-Tone)”, “3.6 Keeping Frequency Ratio

Constant (2-Channel Ganged Operation, Ratio)”, and “3.7 Obtaining Differential Output (2-Channel

Ganged Operation, Differential)” in the Application Instruction Manual.

Inter-channel parameter copy [Parameter Copy] (FG420 only)

Copies the settings between channels.



“3.1 Copying Settings Between Channels” in the

Application Instruction Manual.

2-channel same value setting On/Off [Both] (FG420 only)

Switches on/off setting of the same value for both channels.



“3.2 Unifying Settings of 2

Channels” in the Application Instruction Manual.

Содержание FG420





















































































































































































Результаты поиска

Содержание FG420

Отзывы:

Похожие инструкции для FG420

Бренды по названию

Популярные бренды

YOKOGAWA FG420, Руководство пользователя

Результаты поиска

Содержание FG420

Отзывы:

Похожие инструкции для FG420

Бренды по названию

Популярные бренды