YOKOGAWA FG420, Руководство пользователя

Страница: 62 / 180

48 IM FG410-01EN
4. BASIC OPERATION
4.4.3 Setting the waveform
1.
Press the
FCTN
FCTN shortcut key
to display the waveform choice list.
Alternatively, select the [Fctn] field and
press the
ENTER
ENTER key to open
the choice list.
Even if there are several setting
screens, the [Fctn] field is always
displayed at the top right of the first
page.
2.
Select the desired waveform from the choice list and then press the
ENTER
ENTER key
to apply the setting and reflect it to the output.
The desired waveform can also be set and reflected to the output by inputting the
number of the desired waveform displayed in the choice list from the numeric keypad.
The desired waveform can also be set by inputting a number from the numeric keypad
while the [Fctn] field is selected (without the choice list displayed).
4.4.4 Setting the frequency
1.
Press the
FREQ
FREQ shortcut key
to display the frequency input field, or
select the [Freq] field and then press
the
ENTER
ENTER key to open the
input field.
Even if there are several setting
screens, the [Freq] field is always
displayed at the top left of the first
page.
When [Period] is displayed in the
[Freq] field and the period and not the
frequency is displayed, either press
the
FREQ
FREQ key or press the [Freq]
soft key, to switch to the frequency
display.
2.
Select the digit to be changed with the left/right arrow keys, and increment/
decrement the value with the up/down arrow keys or the modify knob. The
change is instantly reflected to the output.
Alternatively, enter a numeric value using the 0 ... 9 numeric keypad. Then press
the
ENTER
ENTER key or one of the unit keys (soft keys: [uHz] [mHz] [Hz] [kHz] [MHz])
to set the input value and reflect it to the output. If the ENTER key is used, the unit is
set to Hz.
Waveform
choice list
Frequency input
field