YOKOGAWA FG420, Руководство пользователя

Страница: 124 / 180

110 IM FG410-01EN
4. BASIC OPERATION
4.9.2 Auto burst
Oscillation and stop are automatically repeated with the respectively specified wave number. No
trigger signal is required.
Settings and manipulations are done on the Oscillator setting screen. “Oscillator” is displayed at the
top left of the Oscillator setting screen. When another screen is displayed, pressing the
MENU
MENU
key displays the top menu, so select [Oscillator] and then press the
ENTER
ENTER key.
a) Auto burst example
The following example is for mark wave number (oscillation wave number) = 3, space wave number
(oscillation stop wave number) = 2, oscillation start/stop phase = 30°, stop level = off.
Oscillation start/stop phase
30°
Oscillation phase continues even during stop
Mark wave
number: 3
Space wave
number: 2
Oscillation Stop
b) Setting the oscillation mode to auto burst
Set [Mode] (oscillation mode) to [Burst]
on the Oscillator setting screen. The
oscilla-tion mode is switched to the
burst oscillation mode as a result.
In the burst oscillation mode, the
setting screen consists of two pages,
which can be toggled with the
NEXT
NEXT key.
Next, set [BrstMode] (burst mode) to
[Auto] (auto) on the 2nd page of the
burst oscillation mode.
Select [Burst] in
[Mode] and then
press the ENTER
key.
Select [Auto] in
[BrstMode] and
then press the
ENTER key.