YOKOGAWA FG420, Руководство пользователя

Страница: 60 / 180

46 IM FG410-01EN
4. BASIC OPERATION
• Return to previous setting [Last State]
The operation differs as follows according to the method used the previous time to set the power
off.
If the power was switched off the previous time with the power switch on the panel
The settings before the power was switched off are restored.
If the power was switched off the previous time by cutting off the power supply
The output is off.
This is the case when the equipment is mounted along with other devices on a rack and the power
supply to all the units is switched on/off at the same time.
The operation is done on the Utility screen.
1.
Press the
MENU
MENU key to display
the top menu window.
In this window, select [Utility] and then
press the
ENTER
ENTER key to display
the Utility screen.
2.
On the Utility screen, select the
[Power-On Output] field and then
press the
ENTER
ENTER key.
3.
The power-on output setting window is
displayed, so select the desired item
and then press the
ENTER
ENTER key.
The output setting condition choice
list is displayed, so select the desired
item and then press the
ENTER
ENTER
key.
4.
Once the desired power-on output
setting has been completed, select
[OK] in the lower part of the window
and then press the
ENTER
ENTER key.
The power-on output setting change
is applied and the window closes.
To not apply the power-on output
setting change, select [Cancel] in the
lower part of the window and then
press the
ENTER
ENTER key, or press
the
CANCEL
CANCEL key.
In the top
menu, select
[Utility] and
then press the
ENTER key.
On the Utility
screen, select
[Power-On
Output] and
then press the
ENTER key.
The power-on
output setting
window is
displayed.
Set the output
setting
condition.
Select [OK] and
then press the
ENTER key.