YOKOGAWA FC400G, Руководство пользователя, Страница: 42 / 91

< 5. Key Operation and Display >
5-11
IM 12F5A1-01E
5.4.2 Modes in the Setting/Service Level and Selection of Their Setting Items
NO
F5.4.2-1.ai
*
YES NO ENT
YES NO
YES NO
YES NO
OUTPUT
MEASURE
YES NO
HOLD
HOLD
YES NO
SETHOLD
WASH
PLATEAU
SERVICE
SERVICE
YES
MODE NO YES
MODE NO YES
MODE NO YES
MODE NO YES
MODE
ENT
01
MODE
ENT
02
MODE
ENT
04
MODE
ENT
05
MODE
ENT
07
MODE
ENT
08
*
C
C
<Setting level>
Set output range?
Specify a setting item
code number.
MODE
ENT
09
MODE
ENT
10
ENT
For the description of
<* OUTPU>, see
item (a) in 5.4.2.
For the description of
<* SET.HD>, see
item (b) in 5.4.2.
For the description of
<* WASH>, see
item (c) in 5.4.2.
For the description of
<* PLAT>, see
item (d) in 5.4.2.
Set hold parameter?
Enter service code No.
Enter the washing mode?
Enter the plateau mode?
（Note 1)
Enter the servise level?
To
(In hold status)
<Service level>
> >
Note 1:
[*WASH] may be displayed as
[*AZ.CAL] depending on setting.
(Corresponds to mode (code) in
Sec.4.2.3 Service Mode.
09 [*WA/CA] : Washing / Auto zero
Calibration selection.)
For the description of
code 01, see item (f)
in 5.4.2.
For the description of
code 07, see item (f)
in 5.4.2.
For the description of
code 04, see item (f)
in 5.4.2.
For the description of
code 05, see item (f)
in 5.4.2.
For the description of
code 02, see item (f)
in 5.4.2.
For the description of
code 08, see item (f)
in 5.4.2.
For the description of
code 10, see item (f)
in 5.4.2.
For the description of
code 09, see item (f)
in 5.4.2.
Note : If any code other than code 01 ,02, 04, 05, 07, 08 and 10 (for example, code 80) is inadvertently entered, immediately press the
MODE
key to exit from the service level.