YOKOGAWA FC400G, Руководство пользователя, Страница: 34 / 91

< 5. Key Operation and Display >
5-3
IM 12F5A1-01E
5.3 Basic Key Operation
5.3.1 Key Operation When
YES
NO
Indication Blinks
If the
YES
NO
indication blinks in the operation key indicator (

in the figure below), press the
YES
or
NO
key to response to the message displayed on the message area (

in the figure).
(Example)
F5.3.1e.ai
2
3
1
YES NO
CAL
Blinking, indicating that the FC400G is not yet in
the CAL mode.
YES NO
Requesting the or key.
Inquiring whether to enter the CAL mode.
5.3.2 Key Operation When
ENT
Indication Blinks
If the
ENT
indication blinks in the operation key indicator, data entry is required
corresponding to the message displayed in the message area. Use the key to shift the blinking
along digits in the data area, increase the value of a blinking digit using the key, and finally set it
using the
ENT
key.
(Example)
F5.3.2e.ai
2
3
1
ENT
Not blinking, indicating that the FC400G is in the
OUTPUT mode.
Requesting data entry.
Requesting entry of a concentration value with
respect to 100% output.
OUTPUT