6-23
IM CW500-01EN
V/A/P/ΣP
Press F4 (V/A/P/ΣP) to select the harmonic analysis parameter (voltage,
current, power, or system total or total sum power).
Displaying a List of Harmonics
Press F1 to display a list of harmonics.
The voltage, current, rms value of power harmonics, percentage content,
and phase angle, from 1st to 50th order, in a list.
Display Symbol
V
Voltage
1
A
Current
P
2
Active power of
each channel
+
In
ΣP
2
System total/total sum
Active power
+
In
–
Out
–
Out
1 For 3P3W3A, rms line voltages are displayed.
2 The letters and numbers displayed at the top represent the displayed
parameter and the channel or system number. If there is a space
between the letter P and the number, only the system number is
displayed. In this case, the measured values are the sum of each
system. If only P is displayed, the measured values are total sums.
6.6 Harmonics
