5-39
IM CW500-01EN
Transfer data
This is used to transfer measured data, screenshots, and setup data from
the internal memory to an SD memory card. Be careful when transferring
data files because they are not sorted by recording date. The data
recording dates are listed to the right of file names. Note that dates of
data files transferred from the internal memory to an SD memory card are
the dates when they were transferred. A scroll bar appears when not all
the data can be displayed on the screen.
Data location
Scroll bar
Check box
<Procedure>
Use the up and down arrow keys to move to the data you want to transfer.
→
Press ENTER to select it.
→
Press F2 to show a delete confirmation
message.
→
Use the left and right arrow keys to select Yes or NO.
→
Press
ENTER to confirm.
When you select a data file to be transferred, the corresponding check
box is selected. You can transfer several data files at once.
Transfer
Press F2 (transfer) to show a confirmation message. Select “Yes” to
transfer the data.
SD card
Press F3 (SD memory card) to view the data stored in the transfer
destination SD memory card. To return to the transfer data selection
screen, press F3 (internal memory) again. Switching the screen clears all
the selected check boxes.
5.6 Saved Data
