YOKOGAWA CENTUM CS, Техническая информация

Страница: 248 / 253

ii
TI 33J01J10-01EN
3.8.2 Table Terminal numbers and signal types [revised]
3.8.3
l
When receiving dry contact signals (Input frequency: 0 to 10 kHz) [Figure were added]
n
A2EXR001 Shunt Resistor Unit [Changing position described]
n
A2SAM105 Current input/voltage input adaptor [Revised description for installing the shunt resistor
module]
l
When the input current value exceeds 25 m A [Added]
l
When sharing the current signal with another receiving device. [Title added]
June 2018 /9th Edition
3.1 Cables and Terminals
Table Rating temperature of Cables [Revised A2BN5D cable requirements]
3.7.1 N-IO I/O Unit Types
n
I/O Modules that can be used with Base Plate
Table I/O Modules Installable with Base Plate [Correction of clerical error]
3.7.3 Table Terminal Numbers and Signal Types (A2BN5D) [P+F I.S. barrier models are deleted]
Mar. 2018 /8th Edition
1.3 Notes for the field power supply unit of N-IO is added.
1.5.1 Examples of Spark-Killer and Diode Installation [Title is changed.]
2.5.4 Figure Mounting stopper to the DIN rail is revised.
2.5.6 Example of Mounting an FCU for N-IO and N-IO Nodes in a Cabinet
[Mounting conditions are corrected.]
Example of Mounting N-IO Nodes (Non-Intrinsic Safety Barrier) in a Cabinet
[Mounting conditions are corrected.]
Example of Mounting N-IO Nodes (Intrinsic Safety Barrier) in a Cabinet
[Mounting conditions are corrected.]
3.5 Figure Area for Signal Cable from Field is revised.
Figure Example of Node Interface Unit and I/O Unit Cable Wiring (Cabinet) is revised.
Figure Example of Node Interface Unit and I/O Unit Cable Wiring (Junction Box) is revised
3.7.3
n
A2SDV505,
n
A2SDV506,
n
A2SMX802, [Errors in writing are corrected]
Jan. 2018 /7th Edition
- N-IO product A2EXR001 was added.
1. System Installation Requirements
1.7 Corrosive-gas Environment Compatibility [A2EXR001 was added]
2. Transportation, Storage and Installation
2.5 Installation
2.5.6 Example of Mounting to General Purpose Cabinet/Junction Box
Example of Mounting an FCU for N-IO and N-IO Nodes in a Cabinet [A2EXR001 was added]
Example of Mounting N-IO Nodes (Non-Intrinsic Safety Barrier) in a Cabinet [A2EXR001 was
added]
Figure Example of Mounting an FCU for N-IO Nodes in a Cabinet [CP461 is changed to
CP4

1]
3. Cabling
3.7.2 Base Plate for Adaptor
Connecting Signal Cables with A2BN3D [A2EXR001 was added]
3.7.3 Adaptor (for A2BN3D)
A2SAP105 Pulse Input Signal Adaptor [A2EXR001 was added]
3.8.2 Nest for I/O Adaptor
Signal connection of the terminal block of the nest for I/O adaptor A2BA3D [A2EXR001 was
added]
3.8.3 Adaptor (for A2BA3D)
A2SAP105 Pulse Input Signal Adaptor [A2EXR001 was added]
3.9 Connecting Bus Cable
Handling of Vnet/IP cables Connected to the Processor Module [CP471 was added]
June 2017/6th Edition
1. System Installation Requirements
1.2 Control Room Environment
n
Applied Standards [Remark *6 was added]
l
Safety Standards [CSA standard number was added]
l
EMC Conformity Standards [Position of remark *5 was changed]
n
Installation Environment Specifications
Mar. 29, 2019-00