YOKOGAWA CENTUM CS, Техническая информация

Страница: 139 / 253

3. Cabling
3-41
TI 33J01J10-01EN
l
Pressure Clamp Terminal (for ARS

M)
For both signal line and power line of the Solid State Relay Board ARS

M, pressure clamp
terminals are used.
• Terminal processing
When connecting the signal and power line to the pressure clamp terminal, strip the cable
coating (without a sleeve) or attach a sleeve to the cable. The following shows the length of
the coating stripped for cases when a sleeve is not used and when it is used.
Table Terminal treatment for pressure clamp terminal signal line
Cable thickness (mm
2
)
Length of coating
stripped (mm)
Inserting length of
sleeve (mm)
Without sleeve 0.5 to 2 (AWG20 to 14) 8 –
With sleeve 0.5 to 2 (AWG20 to 14) 8 8
Table Terminal treatment for pressure clamp terminal power line
Cable thickness (mm
2
)
Length of coating
stripped (mm)
Inserting length of
sleeve (mm)
Without sleeve 0.5 to 2 (AWG20 to 14) 9 –
With sleeve 0.5 to 1.5 (AWG20 to 16) 9 8
Oct. 5, 2018-00