manualshive.com logo in svg

YOKOGAWA 735201, Руководство пользователя

Поделиться
Скачать
YOKOGAWA 735201 Скачать руководство пользователя страница 3

 

IM 735201-01E

 

ii

 

Terms and Conditions of the Software License 

 

NOTICE - PLEASE READ CAREFULLY BEFORE USE 

Thank you very much for purchasing this medium containing a software program and related documentation provided by 
Yokogawa Electric Corporation and Yokogawa Meters & Instruments Corporation (hereinafter called "Yokogawa"), and the 
program contained, embedded, inserted or used in the medium (hereinafter called the "Yokogawa Software Program"). 
 
By opening this package or plastic wrapping (hereinafter called "Package") enclosing    the Yokogawa Software Program, you 
acknowledge that you understand and agree to the "Terms and Conditions of the Software License" (hereinafter called "Terms 
and Conditions") which is written in the documentation and separately attached. Accordingly, the Terms and Conditions bind you. 
The Yokogawa Software Program and its related documentation including ownership of copyright shall remain the exclusive 
property of Yokogawa or those third parties from whom sublicensed software in the Yokogawa Software Program is licensed.   
 
Yokogawa hereby grants you permission to use the Yokogawa Software Program on the conditions that you agree to the Terms 
and Conditions before you open the Package and/or install it in or onto a computer. 
 
IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS, YOU CANNOT OPEN THE PACKAGE, AND MUST 
IMMEDIATELY RETURN IT TO YOKOGAWA OR ITS DESIGNATED PARTY. 
 

Terms and Conditions of the Software License 

Yokogawa Electric Corporation and Yokogawa Meters & Instruments Corporation, Japanese corporations (hereinafter called 
"Yokogawa"), grant permission to use this Yokogawa Software Program (hereinafter called the "Licensed Software") to the 
Licensee    on the conditions that the Licensee agrees to the terms and conditions stipulated in Article 1 hereof.   
You, as the Licensee (hereinafter called "Licensee"), shall agree to the following terms and conditions for the software license 
(hereinafter called the "Agreement") based on the use intended for the Licensed Software.   
Please note that Yokogawa grants the Licensee permission to use the Licensed Software under the terms and conditions herein 
and in no event shall Yokogawa intend to sell or transfer the Licensed Software to the Licensee. 
Licensed Software Name: 

TB200

 

Utility 

Number of License: 

1 

 
Article 1 (Scope Covered by these Terms and Conditions) 
1.1  The terms and conditions stipulated herein shall be applied to any Licensee who purchases the Licensed Software on the 

condition that the Licensee consents to agree to the terms and conditions stipulated herein. 

1.2  The "Licensed Software" herein shall mean and include all applicable programs and documentation, without limitation, all 

proprietary technology, algorithms, and know-how such as a factor, invariant or process contained therein. 

 
Article 2 (Grant of License) 
2.1  Yokogawa grants the Licensee, for the purpose of single use, non-exclusive and non-transferable license of the Licensed 

Software with the license fee separately agreed upon by both parties.   

2.2  The Licensee is, unless otherwise agreed in writing by Yokogawa, not entitled to copy, change, sell, distribute, transfer, or 

sublicense the Licensed Software. 

2.3  The Licensed Software shall not be copied in whole or in part except for keeping one (1) copy for back-up purposes. The 

Licensee shall secure or supervise the copy of the Licensed Software by the Licensee itself with great, strict, and due care.   

2.4  In no event shall the Licensee dump, reverse assemble, reverse compile, or reverse engineer the Licensed Software so that 

the Licensee may translate the Licensed Software into other programs or change it into a man-readable form from the 
source code of the Licensed Software. Unless otherwise separately agreed by Yokogawa, Yokogawa shall not provide the 
Licensee the source code for the Licensed Software.   

2.5  The Licensed Software and its related documentation shall be the proprietary property or trade secret of Yokogawa or a third 

party which grants Yokogawa the rights. In no event shall the Licensee be transferred, leased, sublicensed, or assigned any 
rights relating to the Licensed Software. 

2.6  Yokogawa may use or add copy protection in or onto the Licensed Software. In no event shall the Licensee remove or 

attempt to remove such copy protection. 

2.7  The Licensed Software may include a software program licensed for re-use by a third party (hereinafter called "Third Party 

Software", which may include any software program from affiliates of Yokogawa made or coded by themselves.)  In the 
case that Yokogawa is granted permission to sublicense to third parties by any licensors (sub-licensor) of the Third Party 
Software pursuant to different terms and conditions than those stipulated in this Agreement, the Licensee shall observe such 
terms and conditions of which Yokogawa notifies the Licensee in writing separately. 

2.8  In no event shall the Licensee modify, remove or delete a copyright notice of Yokogawa and its licenser contained in the 

Licensed Software, including any copy thereof. 

 
 

Содержание 735201






































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды