Yenista Optics OSICS, Руководство пользователя

Страница: 29 / 252

OSICS User Manual 29
3. Turning On/Off and Initializing the OSICS
Multifunction Platform
3.1 Turning on the OSICS Multifunction Platform and
Accessing the System Status Screen
Subject Turning on the OSICS multifunction platform also turns on all installed modules.
After the OSICS multifunction platform is turned on, the
System Status screen is
automatically displayed.
Before Starting Make sure the OSICS Mainframe is properly installed and connected (see section
Installing and Connecting the OSICS Multifunction Platform, p. 21 ).
Procedure 1. On the rear panel, set the MAINS power switch to I (see Figure 2, p. 18 ).
2. On the front panel, press the on/off button (see Figure 1, p. 17 ).
• The OSICS Mainframe performs the initialization routine, the message
Initializing
appears.
• The OSICS Mainframe prompts you to enter a password.
Figure 8: Password Screen
3. Enter your password as follows (default password is
0000
):
a. Turn the rotary knob to put the cursor under the digit you want to modify and
press the knob to highlight it.
b. Turn the knob clockwise to increase the value or anticlockwise to decrease it and
press the knob to validate the selected digit.
c. Perform steps a. and b. again with the other digits to modify.
To modify the password, see section
Modifying the OSICS Mainframe Password, p. 35 .
If you forget your password, contact the Y enista Optics customer support service
(see section Contact Information, p. 4 ).
Do not turn the OSICS Mainframe off before the system is fully
initialized.
CAUTION
ENTER
Password :
0000
▲
Press the knob to change the digit.