Yenista Optics OSICS, Руководство пользователя

Страница: 35 / 252

Turning On/Off and Initializing the OSICS Multifunction Platform
OSICS User Manual 35
3.4 Modifying the OSICS Mainframe Password
Subject For laser safety reasons, a four digit password controls the access to the OSICS
Mainframe.
The default password is
0000
. This section explains how to modify it.
Procedure 1. Access the Main Setup menu (see section Accessing the OSICS Setup Menus, p. 33 ).
2. Turn the rotary knob to put the cursor before the Password menu and press the knob
to enter it.
The
Password sub-menu appears and prompts you to enter the actual password.
3. Enter the current password as follows:
a. Turn the rotary knob to put the cursor under the digit to modify and press the
knob to highlight it.
b. Turn the knob clockwise to increase the value or anticlockwise to decrease it and
press the knob to validate the selected digit.
c. Perform steps a. and b. again with the other digits to modify.
d. Turn the rotary knob clockwise to put the cursor under
ENTER and press the
knob to validate.
The screen prompts you to enter a new password.
Figure 11: Main Setup – New Password
4. Enter the new password as follows:
a. Turn the rotary knob to put the cursor under the digit to modify and press the
knob to highlight it.
b. Turn the knob clockwise to increase the value or anticlockwise to decrease it and
press the knob to validate the selected digit.
c. Repeat steps a. and b. again with the other digits to modify.
d. Turn the rotary knob clockwise to put the cursor under
ENTER and press the
knob to validate.
A confirmation message appears.
5. Press the knob to confirm the password change.
Main 1 2 3 4 5 6 7 8
Main Setup - Password
EXIT ESCAPE
▲
Password :
1234
Enter a new password.
ENTER