YASKAWA CIMR-E7U Series, Техническое руководство

Страница: 64 / 83

E7 Drive Parameters 4-21
ENTER/ACCEPT Command (Write Only)
Caution
Data sent to the E7 drive serially, is sent to the E7 drive’s RAM and may be lost when the E7 drive looses power. In order for this data to be
retained upon power loss, it must be first transferred to non-volatile memory. The ENTER command transfers the current RAM parameter data
to non-volatile memory. Caution should be exercised when using the ENTER command as the maximum number of non-volatile memory writes
cannot exceed 100,000. Excessive use of the ENTER command will cause the E7 drive to fail. Entering data through the digital operator
transfers the data to non-volatile memory without the use of the ENTER command. Data that cannot be changed while the E7 drive is in RUN
mode, is stored in a temporary location. The ACCEPT command is used to move that data from temporary storage to active RAM. There is not
restriction on the use of the ACCEPT command.
Table 4.5 - ENTER Command
Addr Function Data Description
910 ACCEPT 0 Transfer data to active RAM
900 ENTER 0 Transfers the current parameter data to non-volatile storage