xiii
183574-1CD
183574-1CD
Safety
Ensure Safety
ArcWorld 50/50S and 52/
52S
All personnel working with the Robot (safety administration, installation,
operation, and maintenance personnel) must always be prepared and
“Safety First” minded, to ensure the safety of all personnel.
WARNING
• In the vicinity of the area where the Robot is installed, avoid any
dangerous actions, such as entering the Robot's operating range
without due care.
Failure to observe this instruction may cause contact with the Robot or
peripheral equipment, which may result in death or serious injury.
• Strictly observe the safety precautions and signs in the factory, such
as “Flammable”, “High Voltage”, “Danger”, “Off-limits to
Unauthorized Personnel”.
Failure to observe this instruction may result in death or serious injury
do to fire, electric shock, caused by contact with the Robot or other
equipment.
• Strictly observe the following precautions about clothing:
– Always wear approved work clothes (no loose-fitting clothes).
– To prevent mis-operation, do not wear gloves when operating the
Robot.
– Do not allow underwear, shirts, or neckties hang out from the
work clothes.
– Do not wear accessories, such as earrings, rings, or necklaces.
– Always wear protective safety equipment, such as hard hats,
safety shoes (with slip-proof soles), face shields, safety glasses,
and gloves as necessary.
Failure to observe this instruction may result in death or serious injury.
• The following must be understood and strictly observed by all
personnel as rules:
– Unauthorized personnel other than the operator must not
approach the area where the Robot is installed.
Failure to observe this instruction may cause contact with the Robot,
Controller, control panel, workpiece, or Positioner, etc., may result in
death or serious injury.
13 of 126