55
Your transom windows are installed.
FINISH
Place window fl ush to the measured line.
Center the window across the door panel
(Fig. B)
.
Align center of window to center lines.
Seal window with high quality exterior-grade caulk
behind frame before installing window
(Fig. C)
.
Fasten window with (2) 3/4" screws at both sides
and with (4) 3/4" screws across top of window
(Fig. C)
.
5
4
6
PARTS REQUIRED:
DOOR TRANSOM WINDOWS
BACK SIDE OF LEFT DOOR
1-1/8"
(2,9 cm)
Flush window
to line
1-1/8"
(2,9 cm)
LEFT DOOR
Fig. A
Fig. B
Fig. C
3/4" (1,9 cm)
Screws
You must caulk completely around window
frame and all exposed door panel edges
and trim to validate your warranty.
Use a paintable exterior rated caulk.
At front side of door, apply caulk along bottom edge
of window
(Fig. D)
.
FRONT OF DOOR
Fig. D
For the left door, measure 1-1/8" from bottom of opening
at two locations
(Fig. A)
.
Mark each measurement.
Scribe a line across door panel.
Mark center of window opening at top and bottom.
Caulk between
frame and door.
CENTER
on lines
CENTER
CENTER
Содержание RIDGEPOINTE
Страница 2: ...This page intentionally left blank...