Yardline RIDGEPOINTE, Инструкция по сборке

Страница: 45 / 78

43
1-1/4" (3,2 cm)
PARTS REQUIRED:
SOFFIT NAILERS
2" (5,1 cm)
x16
Mark wall at each rafter with a square fl ush to bottom side of rafter and side wall (Fig. B) .
2
3
BEGIN
1
Repeat steps to install nailers on opposite side.
At the back of the shed, install (2) 2" x 5" soffi t fi llers fl ush to bottom and outside edges of rafter (Fig. A) .
Fasten with (2) 1-1/4" screws, as shown. Repeat on opposite side of shed .
Install 46-3/4" soffi t fl ush to 96" soffi t and marks.
Fasten at each mark with 2" nails angled into the studs (nail into studs) (Fig. C) .
Stud
46-3/4"
1-1/2" x 46-3/4"
1-1/2" x 96"
96"
x2
3/8" x 2" x 5" (1 x 5,1 x 12,7 cm)
Fig. C
TOP VIEW
Fig. A
1-1/4" (3,2 cm)
Screws
Flush
Flush
46-3/4"
Mark
2" (5,1 cm)
Nails
Fig. B
2" (5,1 cm) Nails
at angle
x4
x2
5/8" x 1-1/2" x 96" (1,6 x 3,8 x 243,2 cm) OSB
x2
5/8" x 1-1/2" x 46-3/4" (1,6 x 3,8 x 118,7 cm) OSB
FILLER