Yanmar 2V Series Скачать руководство пользователя

Страница: 72 / 112

PERIODIC MAINTENANCE

2V Operation Manual

DANGER

FIRE AND EXPLOSION HAZARD!

• Only use the key switch to start the

engine.

• NEVER jumpstart the engine. Sparks

caused by jumping the battery to the
starter terminals may cause a fire or
explosion.

• Failure to comply will result in death or

serious injury.

0000004en

DANGER

SCALD HAZARD!

• NEVER remove the radiator cap if the

engine is hot. Steam and hot engine
coolant will spurt out and seriously
burn you. Allow the engine to cool
down before you attempt to remove
the radiator cap.

• Securely tighten the radiator cap after

you check the radiator. Steam can
spurt out during engine operation if
the cap is loose.

• ALWAYS check the level of the engine

coolant by observing the reserve tank.

• Failure to comply will result in death or

serious injury.

0000002en

DANGER

FIRE AND EXPLOSION HAZARD!

• Diesel fuel is extremely flammable and

explosive under certain conditions.

• Only fill the fuel tank with diesel fuel.

Filling the fuel tank with gasoline may
result in a fire and will damage the
engine.

• NEVER refuel with the engine running.

• Wipe up all spills immediately.

• Keep sparks, open flames or any other

form of ignition (match, cigarette,
static electric source) away when
fueling / refueling.

• NEVER overfill the fuel tank.

• Fill the fuel tank. Store any containers

containing fuel in a well-ventilated
area, away from any combustibles or
sources of ignition.

• Failure to comply will result in death or

serious injury.

0000005en

Содержание 2V Series

















































































































Результаты поиска

Содержание 2V Series

Отзывы:

Похожие инструкции для 2V Series

Бренды по названию

Популярные бренды

Yanmar 2V Series, Руководство по эксплуатации

Результаты поиска

Содержание 2V Series

Отзывы:

Похожие инструкции для 2V Series

Бренды по названию

Популярные бренды