Yanmar 2V Series Скачать руководство пользователя

Страница: 78 / 112

PERIODIC MAINTENANCE

2V Operation Manual

WARNING

SHOCK HAZARD!

• Turn off the battery switch (if

equipped) or disconnect the negative
battery cable before servicing the
electrical system.

• Check the electrical harnesses for

cracks, abrasions and damaged or
corroded connectors. ALWAYS keep
the connectors and terminals clean.

• Failure to comply could result in death

or serious injury.

0000009en

WARNING

SEVER HAZARD!

• Stop the engine before you begin to

service it.

• NEVER leave the key in the key switch

when you are servicing the engine.
Someone may accidentally start the
engine and not realize you are
servicing it. This could result in a
serious injury.

• If you must service the engine while it

is operating, remove all jewelry, tie
back long hair, and keep your hands,
other body parts and clothing away
from moving / rotating parts.

• Failure to comply could result in death

or serious injury.

0000010en

WARNING

BURN HAZARD!

• If you must drain the engine oil while it

is still hot, stay clear of the hot engine
oil to avoid being burned.

• ALWAYS wear eye protection.

• Failure to comply could result in death

or serious injury.

0000011en

Содержание 2V Series

















































































































Результаты поиска

Содержание 2V Series

Отзывы:

Похожие инструкции для 2V Series

Бренды по названию

Популярные бренды

Yanmar 2V Series, Руководство по эксплуатации

Результаты поиска

Содержание 2V Series

Отзывы:

Похожие инструкции для 2V Series

Бренды по названию

Популярные бренды