background image

PERIODIC MAINTENANCE

2V Operation Manual

75

Drain Fuel Tank

Note that a typical fuel tank is illustrated.

1. Position an approved container under the diesel 

fuel tank 

(Figure 3, (1))

 to collect the 

contaminants.

Figure 3

2. Remove the drain plug 

(Figure 3, (2))

 and fuel 

cap 

(Figure 3, (3)) 

of the fuel tank to drain the 

contaminants from the bottom of the tank.

3. Drain the tank until clean diesel fuel with no 

water and dirt flows out. Tighten the drain plug 

(Figure 3, (2)) 

firmly and hand-tighten the fuel 

cap 

(Figure 3, (3))

. Over-tightening the fuel cap 

will damage it.

Clean Air Cleaner Element

Note that a typical air cleaner is shown in 

Figure 4

 

and 

Figure 5

 for illustrative purposes only.

Figure 4

The engine performance is adversely affected 
when the air cleaner element is clogged with dust. 
Be sure to clean the air filter element periodically.

A

 DANGER

FIRE AND EXPLOSION HAZARD!

• Diesel fuel is extremely flammable and 

explosive under certain conditions.

• When you remove any fuel system 

component to perform maintenance 
(such as changing the fuel filter) place 
an approved container under the 
opening to catch the fuel.

• NEVER use a shop rag to catch the 

fuel. Vapors from the rag are extremely 
flammable and explosive.

• Wipe up any spills immediately.

• Wear eye protection. The fuel system 

is under pressure and fuel could spray 
out when you remove any fuel system 
component.

• Failure to comply will result in death or 

serious injury.

0000009en

0000065A

(1)

(2)

(

3

)

0002424

(1)

(2)

Содержание 2V Series

















































































































Отзывы: