Yanmar 2V Series Скачать руководство пользователя

Страница: 55 / 112

BEFORE YOU OPERATE

2V Operation Manual

Engine Coolant Specifications

Use a Long Life Coolant (LLC) or an Extended Life
Coolant (ELC) that meets or exceeds the following
guidelines and specifications.

Alternative Engine Coolant

If an Extended or Long Life Coolant is not available,
you may use an ethylene glycol or propylene glycol
based conventional coolant (green).

Notes:

1. ALWAYS use a mix of coolant and water.

NEVER use water only.

2. Mix coolant and water per the mixing

instructions on the coolant container.

3. Water quality is important to coolant

performance. Yanmar recommends that soft,
distilled, or demineralized water be used to
mix with coolants.

4. NEVER mix extended or long life coolants

and conventional (green) coolants.

5. NEVER mix different types and / or colors of

extended life coolants.

6. Replace the coolant every 1000 engine hours

or once a year.

Additional Technical Coolant
Specifications:

• ASTM D6210, D4985 (US)

• JIS K-2234 (Japan)

• SAE J814C, J1941, J1034 or J2036

(International)

Filling Radiator With Engine Coolant

This procedure is for refilling the radiator for the first
time or refilling it after it is flushed. Note that a
typical radiator is illustrated.

1. Check to be sure that all hoses are connected

and all clamps are in place.

2. Turn the radiator cap

(Figure 6, (1))

counter-

clockwise 90 degrees. Push down on the cap
and continue to turn counterclockwise to
remove.

Note: Do not attempt to remove the radiator

cap without pushing down on it first.

Figure 6

CAUTION

• Only use the engine coolant specified.

Other engine coolants may affect
warranty coverage, cause an internal
buildup of rust and scale and / or
shorten engine life.

• Prevent dirt and debris from

contaminating the engine coolant.
Carefully clean the radiator cap and
the surrounding area before you
remove the cap.

• NEVER mix different types of engine

coolants. This may adversely affect the
properties of the engine coolant.

0000006en

0002422

(1)

(2)

(

)

(4)

(6)

(5)

(7)

Содержание 2V Series

















































































































Результаты поиска

Содержание 2V Series

Отзывы:

Похожие инструкции для 2V Series

Бренды по названию

Популярные бренды

Yanmar 2V Series, Руководство по эксплуатации

Результаты поиска

Содержание 2V Series

Отзывы:

Похожие инструкции для 2V Series

Бренды по названию

Популярные бренды