Yanmar 2V Series Скачать руководство пользователя

Страница: 46 / 112

BEFORE YOU OPERATE

2V Operation Manual

CAUTION

COOLANT HAZARD!

• Wear eye protection and rubber gloves

when you handle Long Life or
Extended Life engine coolant. If
contact with the eyes or skin should
occur, flush eyes and wash
immediately with clean water.

• Failure to comply may result in minor

or moderate injury.

0000005en

CAUTION

• Only use diesel fuels recommended by

Yanmar for the best engine
performance, to prevent engine
damage and to comply with EPA / ARB
warranty requirements.

• Only use clean diesel fuel.

• NEVER remove the primary strainer (if

equipped) from the fuel tank filler port.
If removed, dirt and debris could get
into the fuel system causing it to clog.

0000004en

CAUTION

• Only use the engine oil specified.

Other engine oils may affect warranty
coverage, cause internal engine
components to seize, and / or shorten
engine life.

• Prevent dirt and debris from

contaminating the engine oil. Carefully
clean the oil cap / dipstick and the
surrounding area before you remove
the cap.

• NEVER mix different types of engine

oil. This may adversely affect the
lubricating properties of the engine oil.

• NEVER overfill. Overfilling may result

in white exhaust smoke, engine
overspeed, or internal damage.

0000005en

CAUTION

• Only use the engine coolant specified.

Other engine coolants may affect
warranty coverage, cause an internal
buildup of rust and scale and / or
shorten engine life.

• Prevent dirt and debris from

contaminating the engine coolant.
Carefully clean the radiator cap and
the surrounding area before you
remove the cap.

• NEVER mix different types of engine

coolants. This may adversely affect the
properties of the engine coolant.

0000006en

CAUTION

If any problem is noted during the visual
check, the necessary corrective action
should be taken before you operate the
engine.

0000021en

Содержание 2V Series

















































































































Результаты поиска

Содержание 2V Series

Отзывы:

Похожие инструкции для 2V Series

Бренды по названию

Популярные бренды

Yanmar 2V Series, Руководство по эксплуатации

Результаты поиска

Содержание 2V Series

Отзывы:

Похожие инструкции для 2V Series

Бренды по названию

Популярные бренды