Yamaha YZF-R6, Руководство по обслуживанию

Страница: 202 / 425

4-62
CRANKCASE
ENG
NOTE:
CAUTION:
EAS00384
DISASSEMBLING THE CRANKCASE
1. Place the engine upside down.
Loosen each bolt 1 / 4 of a turn at a time, in
stages and in a crisscross pattern. After all of
the bolts are fully loosened, remove them.
Loosen the bolts in decreasing numerical or-
der (refer to the numbers in the illustration).
The numbers embossed on the crankcase in-
dicate the crankcase tightening sequence.
2. Remove:
crankcase bolts
3. Remove:
lower crankcase
Tap on one side of the crankcase with a soft-
face hammer. Tap only on reinforced por-
tions of the crankcase, not on the crankcase
mating surfaces. Work slowly and carefully
and make sure that the crankcase halves
separate evenly.
M8 85 mm bolts: 1
X
7 ,
10
M8 115 mm bolts: 8 , 9
M8 65 mm bolts: 11 , 12
M6 65 mm bolts: 13 , 14 , 17 , 27
M6 55 mm bolts:
15
,
22
X
26
M6 45 mm bolts:
16
,
19
X
21
M6 75 mm bolt:
18
4. Remove:
dowel pins