Yamaha YZF-R6, Руководство по обслуживанию

Страница: 359 / 425

8-3
INSTRUMENT FUNCTIONS
ELEC
Speedometer
Clock, odometer
“SELECT” button
“RESET” button
1
2
3
4
Coolant
temperature
Display Conditions What to do
0
_
C 40
_
C
Symbol is on and
“LO” is displayed.
Go ahead with riding.
41
_
C 117
_
C
Symbol is on and
temperature is dis-
played.
Go ahead with riding.
118
_
C
140
_
C
Symbol and tem-
perature flashes
and indicator light
comes on.
Stop the motorcycle and
allow it to idle until the
coolant temperature goes
down.
If the temperature does
not go down, stop the en-
gine. Refer to “OVER-
HEATING” in chapter 9.
141
_
C
Symbol flashes,
“HI” is displayed
and flashes, and
the indicator light
comes on.
Stop the engine and allow
it to cool.
Refer to “OVERHEATING”
in chapter 9.
COMBINATION METER
This combination meter is equipped with the fol-
lowing.
S
A speedometer
S
An odometer
S
Two trip odometers
S
A fuel reserve tripmeter
S
A clock
For GB and USA models only:
To change the speedometer display from kilo-
meters to miles, press the “SELECT” button for
at least two seconds.
Odometer and trip meters
Use the trip meters to estimate how far you can
ride on a tank of fuel.
Use the fuel reserve trip meter to see the dis-
tance traveled from when the fuel level dropped
to the reserve level.
Push the “SELECT” button to change between
the odometer mode “ODO” and the trip odome-
ter modes “TRIP 1”and “TRIP 2” in the following
order:
“ODO”
“TRIP 1” “TRIP 2” “ODO”