5 - 36
CHAS
FRONT FORK
21. Measure:
●
Distance
a
Out of specification
→
Turn into the
locknut.
Distance
a
:
19 mm (0.75 in) or more
Between damper rod
1
top and
locknut
2
top.
22. Loosen:
●
Rebound damping adjuster
1
NOTE:
●
Loosen the rebound damping adjuster finger
tight.
●
Record the set position of the adjuster (the
amount of turning out the fully turned in posi-
tion).
23. Install:
●
Push rod
1
●
Fork spring
2
NOTE:
●
Install the fork spring with the damper rod
3
pulled up.
●
After installing the fork spring, hold the
damper rod end so that it will not go down.
24. Install:
●
Spring seat
1
●
Front fork cap bolt
2
NOTE:
Fully finger tighten the front fork cap bolt onto
the damper rod.
25. Tighten:
●
Front fork cap bolt (locknut)
1
NOTE:
Hold the locknut
2
and tighten the front fork
cap bolt with specified torque.
T
R
.
.
29 Nm (2.9 m · kg, 21 ft · lb)
