Yamaha XJR1300(L) 99, Руководство по обслуживанию

Страница: 269 / 338

6-55
CHAS
THE HANDLEBAR
NOTE:
NOTE:
NOTE:
NOTE:
WARNING
WARNING
3. Install:
handlebar grip 1
left grip end 2
There should be 1 3 mm of clearance
a
be-
tween the handlebar grip and the left grip end.
4. Install:
left handlebar switch 1
Align the pin on the left handlebar switch with
the hole
a
in the handlebar.
5. Install:
master cylinder (clutch) 1
master cylinder bracket 2
Align the mating surfaces of the master cylinder
with the punch mark
a
on the handlebar.
6. Install:
throttle grip 1
throttle cable housing
2
throttle cables 3
Apply a thin coat of lithium soap base grease
onto the inside of the throttle grip and install it
onto the handlebar.
Make sure that the pin
a
on the throttle
cable housing is aligned with the hole b in
the handlebar.
7. Install:
right grip end 1
right handlebar switch 2
Make sure that the throttle grip operates
smoothly.