22
So for any audio or midi track, when the Variation effects buss is set to SYS mode, you get the additional dial option
(working!) of Variation send. Seen here in the SW1000XG Mixer in XGWorks.
To assign Insert effects to Audio Parts however you need to go to the XGEditor Window, with an audio channel
highlighted, and click on the detail tab, at the top you will see part number, which can be set to any MIDI or audio
part. The fact that your need to drop back to this window rather than add the effect from the SW1000XG mixer
windows is a bit tedious compared to for example XGEdit, but it works! Don’t forget though, that for these parameters
to be remembered you have to record them or insert them into your event list!
The fundamental points to remember in XGWorks then are.
1: Always save Audio tracks as XWS files or you will lose your data
2: Always remember to INSERT PARAMETERS that you have adjusted into the event list
3: Audio tracks do not equate to audio ports. You can have many more tracks playing back through the 12 ports than
just 12.
4: Remember to check your SYSTEM SETUP menu to make sure you have the correct MIDI and audio ports
assigned, and that you are not filtering out any vital information.
