30
Sound Edge Application Software
■
Output Mixer
The Output Mixer is located on the right side of the block diagram. The analog L/R output signal
will be output from two separate mixers.
Click the [Output Mixer] box to open the Output Mixer setup dialog box.
1
Sign/Level/Value:
Same as for the Input Mixer; however, in this case for signal output.
2
Thru:
To adjust the output level of the original (“dry”) sound.
3
Surround:
To adjust the output level of the delayed (“wet”) sound.
Type1 includes two mixers which remix the sound from the two Key Controls, located in
the center of the block diagram.
Voice Cancel
You can set Voice Cancel to either cancel the vocal part or pass the signal through unaffected.
Type3 does not have the Voice Cancel function.
Click the [Voice Cancel] box to display the Voice Cancel setup dialog box.
1
T h r u :
Passes the original input signal without applying Voice Cancel.
2
Voice Cancel:
Reduces the sounds at the center of the frequency range, or the vocal part of the song
being input, since in most cases this is where the vocal part is located. Use Voice Cancel for
karaoke sing-along to the music without the original vocal part.
2
1
2
3
1
1
2
3
