Yamaha GRIZZLY 700 FI YFM7FGPW, Руководство по обслуживанию

Страница: 420 / 485

9 - 15
– +
ELEC
IGNITION SYSTEM
YES
NO
EBS01047
YES NO
10.Lean angle sensor
• Remove the lean angle sensor.
• Connect the pocket tester (DC 20 V) to the
lean angle sensor coupler as shown.
Positive tester probe
→
yellow/green
1
Negative tester probe
→
black/blue
2
• Set the main switch to “ON”.
• Turn the lean angle sensor to 65°.
• Measure the lean angle sensor output volt-
age.
Lean angle sensor voltage
Less than 65°
±
5°
→
3.55 ~ 4.45 V
More than 65°
±
5°
→
0.65 ~ 1.35 V
• Is the lean angle sensor OK?
Replace the lean
angle sensor.
UP
L Y / G B / L
65˚ 65˚
1
2
11.Wiring
• Check the entire ignition system’s wiring.
Refer to “CIRCUIT DIAGRAM”.
• Is the ignition system’s wiring properly
connected and without defects?
Replace the ECU. Properly connect or
repair the ignition
system’s wiring.