Yamaha GRIZZLY 700 FI YFM7FGPW, Руководство по обслуживанию

Страница: 345 / 485

7 - 33
DRIV
REAR CONSTANT VELOCITY JOINTS AND FINAL
DRIVE GEAR
EBS00194
ADJUSTING THE FINAL GEAR LASH
1. Remove:
• final driven pinion gear assembly
1
• final driven pinion gear shim
2
• final driven pinion gear shim
3
• thrust washer
4
2. Adjust:
• gear lash
▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼▼▼
a. Select a suitable shim(s) and thrust washer
using the following chart.
b. If increased by more than 0.2 mm (0.008
in):
Reduce the thrust washer thickness by 0.2
mm (0.008 in) for every 0.2 mm (0.008 in) of
final driven pinion gear shim increase.
c. If reduced by more than 0.2 mm (0.008 in):
Increase the thrust washer thickness by 0.2
mm (0.008 in) for every 0.2 mm (0.008 in)
that the final driven pinion gear shim is
decreased.
NOTE:
Be sure to use one of each of the final driven
pinion gear shims
2
and
3
to obtain the shim
thickness.
Too little gear
lash
Increase shim thickness.
Too large
gear lash
Reduce shim thickness.
Final driven pinion gear shim
2
Thickness (mm)
0.25 0.30 0.35
0.40 0.45 0.50
Final driven pinion gear shim
3
Thickness (mm)
4.5 4.8
5.1 5.4
1
2
3
4