Maintenance
91
EMU30777
Cleaning and adjusting spark plug
The spark plug is an important engine compo-
nent and is easy to inspect. The condition of
the spark plug can indicate something about
the condition of the engine. For example, if the
center electrode porcelain is very white, this
could indicate an intake air leak or carburetion
problem in that cylinder. Do not attempt to di-
agnose any problems yourself. Instead, take
the outboard motor to a Yamaha dealer. You
should periodically remove and inspect the
spark plug because heat and deposits will
cause the spark plug to slowly break down
and erode.
1.
Remove the bolts to remove the ECM
(Electronic control module) cover.
2.
Remove the bolts that are securing the
ignition coil, and then remove the ignition
coil. Do not use any tools to remove or in-
stall the ignition coil, otherwise the igni-
tion coil coupler may get damaged.
3.
Remove the spark plug. If electrode ero-
sion becomes excessive, or if carbon and
other deposits are excessive, you should
replace the spark plug with another of the
correct type.
WARNING! When remov-
ing or installing a spark plug, be care-
ful not to damage the insulator. A
damaged insulator could allow exter-
nal sparks, which could lead to explo-
sion or fire.
[EWM00561]
4.
Be sure to use the specified spark plug,
otherwise the engine may not operate
properly. Before fitting the spark plug,
measure the electrode gap with a wire
thickness gauge; adjust the gap to speci-
fication if necessary.
1. Bolt
2. ECM (Electronic control module) cover
1. Bolt
2. Ignition coil
Standard spark plug:
LFR6A-11
U6BR11E0.book Page 91 Friday, June 13, 2008 3:43 PM
©
2019 Yamaha Motor Corporation, U.S.A.
