TYAN S3950 Скачать руководство пользователя | Manualshive

Страница: 1 / 82

background image

1

http://www.TYAN.com

Tomcat H1000S

///

S3950

Revision 1.00

Copyright © TYAN Computer Corporation, 2006. All rights reserved. No part of this manual
may be reproduced or translated without prior written consent from TYAN Computer Corp.

All registered and unregistered trademarks and company names contained in this manual
are property of their respective owners including, but not limited to the following.

TYAN, Tomcat H1000S (S3950) are trademarks of TYAN Computer Corporation.
AMD, AMD Opteron, and combinations thereof, are trademarks of Advanced Micro
Devices, Inc.
HyperTransport is a licensed trademark of the HyperTransport Technology Consortium.
AMI, AMIBIOS are trademarks of AMI Software Incorporated.
Microsoft, Windows are trademarks of Microsoft Corporation.
SuSE,is a trademark of SuSE AG.
Linux is a trademark of Linus Torvalds.
QLogic, Zircon, and combinations thereof are trademarks of QLogic Corporation.
IBM, PC, AT, PS/2 are trademarks of IBM Corporation.
Winbond is a trademark of Winbond Electronics Corporation.
Broadcom is a trademark of Broadcom Corporation and/or its subsidiaries
XGI is a trademark of XGI Corporation.
Portable Document Format (PDF) is a trademark of Adobe Corporation.

Information contained in this document is furnished by TYAN Computer Corporation and
has been reviewed for accuracy and reliability prior to printing. TYAN assumes no liability
whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of
TYAN products including liability or warranties relating to fitness for a particular purpose or
merchantability. TYAN retains the right to make changes to product descriptions and/or
specifications at any time, without notice. In no event will TYAN be held liable for any direct
or indirect, incidental or consequential damage, loss of use, loss of data or other malady
resulting from errors or inaccuracies of information contained in this document.

1
2
3
...
»

Содержание S3950



















































































Отзывы:

Нет отзывов

Похожие инструкции для S3950

Бренд: JETWAY Страницы: 48

Бренд: QDI Страницы: 85

DiskOnChip PCI-G-EVB

Бренд: M-system Страницы: 14

Бренд: FIC Страницы: 52

Бренд: Merit Страницы: 4

Бренд: Digilent Страницы: 17

C807MS-E33 Series

Бренд: MSI Страницы: 124

Бренд: Lucky Star Страницы: 77

Бренд: Microchip Technology Страницы: 89

Бренд: Javad Страницы: 12

Бренд: Aeroflex Страницы: 32

Бренд: J&W Страницы: 42

Бренд: Parsun Страницы: 93

Бренд: Aaeon Страницы: 53

Бренд: Aaeon Страницы: 46

Бренд: EVGA Страницы: 35

Бренд: TRIGEM Страницы: 17

Бренд: JETWAY Страницы: 54

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды