manualshive.com logo in svg

Yamaha F13.5B, Руководство пользователя

Поделиться
Скачать
Yamaha F13.5B Скачать руководство пользователя страница 48

 

Operation

 

42

 

EMU32722

 

Procedure for tilting up (power tilt 
models)

 

1.

Place the remote control lever / gear
shift lever in neutral.

2.

Press the power tilt switch “

” (up) until

the outboard motor has tilted up com-
pletely.

3.

Push the tilt support knob into the clamp
bracket to support the engine.

WARNING

 

EWM00261 

 

After tilting the outboard motor, be sure
to support it with the tilt support knob or
tilt support lever. Otherwise the outboard
motor could fall back down suddenly if oil
in the power trim and tilt unit or in the

 

power tilt unit loses pressure.

CAUTION:

 

ECM01640 

 

Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be trail-
ered in the normal running position, use
an additional support device to secure it
in the tilt position. For more detailed in-

 

formation, see page 50.

 

4.

Models equipped with trim rods: Once
the outboard motor is supported with the
tilt support lever, press the power tilt
switch  “

” (down) to retract the trim

rods.

CAUTION:

 

ECM00250 

 

Be sure to retract the trim rods complete-
ly during mooring. This protects the rods
from marine growth and corrosion which
could damage the power trim and tilt

 

mechanism.

ZMU05580

UP

ZMU04884

Содержание F13.5B



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды