Yamaha DTXTREME, Справочное руководство

Страница: 60 / 136

REFERENCE SECTION
Chain Play Mode
60
Chain Edit Page
1
Chain Name
Specify a chain name of up to 8 characters. Use
the leftmost Data Control knob to move the
cursor (input point), and use the second-to-left
knob to choose a character. Repeat this operation
to input up to 8 characters for the chain name.
Available characters are the same as those for the
drum kit name. See page 41 for more
information.
2
Step
Choose a step number to assign a drum kit or
song. You can assign up to 32 steps for each
chain.
❏
Settings: 1 - 32
3
Type
Specify what you assign to the step; song or
drum kit. If the step is the final step in the chain,
you can explicitly complete the chain by
assigning “END” (to avoid proceeding to an
unused step in live performance or so on).
❏
Settings: song, kit (drum kit), END (assigned to a final
step of the chain)
4
Song/Drum Kit Number and Name
If you have chosen “song” for the Type
parameter, specify a song here. If you have
chosen “kit” for the Type parameter, specify a
drum kit here. The top row shows the song or
drum kit number, and the bottom row shows the
associated song or drum kit name for that
number.
❏
Settings: Song: P1 - P31, Q1 - Q67, R1 - R66, U1 - U32
Drum kit: P1 - P90, U1 - U40, C1 - C99
Creating or Editing a Chain
1.
When creating a new chain, use the Data
Control knob corresponding to the Step
parameter and choose the first step.
When editing an existing chain, choose the
step number you want to edit.
2.
Use the Data Control knob corresponding to
the Type parameter and specify either “song”
or “kit” depending on which you want to set
for that step (song or drum kit).
3.
Use the Data Control knob corresponding to
“Num=” and choose the song or drum kit you
want to assign to that step.
4.
Repeat steps 1 to 3 above and specify as many
steps as you want for the current chain.
n
You can program steps assigned to drum kits, as
well as to songs in the same chain.
5.
When you complete the chain at a specific
step, assign “END” to that step using the Data
Control knob corresponding to the Type
parameter. The current chain will be
completed at that step.
n
The chain will stop at the step assigned with
“END” while switching steps in Chain Play mode.
The “END” value is especially useful when you
switch steps using a drum pad or a footswitch,
since it will help avoiding inadvertently switching
to an unused step (song or drum kit).
[CHAIN]"IniChain" Step Type Num=U1
<GHIJK> 1
kit Initkit
1 2 3 4