Yamaha DRCX, Руководство пользователя

Страница: 173 / 312

8-
44
8
ROBOT LANGUAGE
8-5 Sample Programs
8-5-11 Changing the placement sequence for palletizing
With this sample program, the robot picks up a workpiece supplied at P0 and place it sequentially on
a 4
×
5 pallet with the placement sequence shown below.
Point B (=P252)
Point C (=P253) Point D (=P254)
Place points
Pick point
Point A (=P251)
P0
X
Y
Placement sequence
■
Teaching each point of P0 and P251 to P254 should be completed beforehand in PNT
(point) mode. (Matrix is defined as pallet number 0 in this example.)
Program Comment
[NO0] <<Main routine>>
001: MAT 4, 5, 0
; Defines 4
×
5 matrix as pallet number 0
002: C 1
; Sets counter variable to 1
003: CALL 1, 5
; Calls subroutine NO1 five times
004: C 10
; Sets counter variable to 10
005: CALL 2, 5
; Calls subroutine NO2 five times
006: C 11
; Sets counter variable to 11
007: CALL 1, 5
; Calls subroutine NO1 five times
008: C 20
; Sets counter variable to 20
009: CALL 2, 5
; Calls subroutine NO2 five times
[NO1] <<Execution while counting up>>
001: MOVA 0, 100
; Moves to pick point
002: CALL 3, 1
; PICK routine call
003: MSEL 0
; Specifies movement matrix
004: MOVM C, 100
; Moves to place point (on pallet)
005: CALL 4, 1
; PLACE routine call
006: C+
; Counter variable increment
[NO2] << Execution while counting down>>
001: MOVA 0, 100
; Moves to feed source point
002: CALL 3, 1
; PICK routine call
003: MSEL 0
; Specifies movement matrix
004: MOVM C, 100
; Moves to place point (on pallet)
005: CALL 4, 1
; PLACE routine call
006: C-
; Counter variable decrement
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com