27
In
s
ta
lla
tio
n
a
n
d
C
o
n
n
e
c
tio
n
Connecting the transceiver
Connecting the front panel to the main body
Caution
Make sure to turn the transceiver OFF before connecting.
1
Connect the supplied control cable to the
transceiver main body.
Push the control cable plug into the CONTROL
jack on the front panel of the transceiver main
body, until it clicks.
Main
body
Control
cable
2
Connect the other side of the front panel to the
control unit.
Push the other control cable plug into the
CONTROL jack on the transceiver control front
panel, until it clicks.
Control cable
Front panel
Connecting the microphone
1
Connect the supplied microphone to the main
body.
Plug the microphone connector into the MIC jack
on the front panel until it clicks.
Tips
• When disconnecting the microphone, pull the cable
while pressing the connector latch.
• To use an 8-pin connector microphone, use the
optional microphone extension kit “MEK-2”. An
extension cable (Approx. 3 m) is supplied with
MEK-2 allowing you to operate further away from
the main body.
Connecting the antenna
1
Connect the coaxial cable to the main body.
Plug the coaxial cable jack into the ANT terminal
on the rear panel of the main body, then rotate
and tighten it.
P3
P2
7
1
4
8
2
0
5
9
B
A
C
D
3
6
P4
DTMF MICROPHONE
MH-48
ABC
JKL
TUV
GHI
PQRS
DEF
MNO
WXYZ
M IC
Connector
Microphone
Coaxial cable jack
Main body
(rear panel)
