112
F
u
n
c
tio
n
s
to
U
s
e
a
s
N
e
c
e
s
s
a
ry
Connecting an external device
• Data cable “CT-163” (optional)
PKD (packet data input)
GND
PSK (PTT)
RX 9600 (9,600 bps packet data output)
RX 1200 (1,200 bps packet data output)
PK SQL (squelch control)
CTS (data communication control)
RTS (data communication control)
Dsub 9 pin
–
–
GND
–
CTS (data communication control)
RTS (data communication control)
–
DIN 6 pin
PKD (packet data input)
GND
PSK (PTT)
RX 9600 (9,600 bps packet data output)
RX 1200 (1,200 bps packet data output)
PK SQL (squelch control)
Tips
• Make sure to turn off the transceiver before connecting cables.
• For details on connecting to a TNC or computer, see the instruction manual supplied with the TNC.
• The computer may cause interference with reception.
When signals cannot be received normally, move the computer away from the transceiver and use
a photo-coupler and noise filter to connect.
Setting the packet communication operation
1
Turn on the transceiver.
2
Press and hold
for over one second.
The Setup menu appears.
3
Rotate the DIAL to select
[9 DATA]
, then press
.
The menu list appears.
