113
C
o
m
m
u
n
ic
a
tin
g
w
ith
a
S
p
e
c
ifi
c
R
e
m
o
te
S
ta
tio
n
Using the Tone Squelch Function
4
Touch
[SRCH]
.
[DCS SEARCH] appears on the LCD.
The transceiver starts to search for the DCS code.
When a corresponding DCS code is detected, a beep is
emitted and searching stops temporarily. The detected
DCS code blinks.
Tip
To stop searching, touch
[STOP]
.
Tip
To set the searched DCS code,
Touch
[STOP]
key 3 times.
The transceiver exits from Set mode.
Tip
For setting how the transceiver operates when scanning stops, see “Setting the Receive Operation
When Scanning Stops” on page 74.
Notification of a Call from a Remote Station by Vibration
Set the vibrator to alert you of a call from a remote station containing a corresponding
tone or DCS code.
1
Press and hold the
key for over one second.
The transceiver enters Set mode.
2
Touch
[CONFIG]
.
3
Touch
[22 VIBRATOR]
.
4
Rotate the DIAL to select
[MODE]
, then press the
key.
5
Rotate the DIAL to select [SIGNALING].
6
Press .
The vibrator setting is set and the transceiver exits from the Set mode.
Tip
To deactivate the vibrator function, select [OFF] in step 5.
