22
P
re
p
a
ra
tio
n
Preparing the Battery Pack/External Power Supply
Installing/Removing the Battery Pack
Installing the Battery Pack
1
Insert the bottom tabs of the battery pack in the slots
on the back side lower part of the transceiver.
2
Push the battery in until the battery latches click
securely.
Caution
Charge the battery pack before using the transceiver for the first
time after purchase, or when it has not been used for a long
period time.
Caution
Risk of explosion if battery is replaced by an incorrect typ.
Dispose of used batteries according to the instructions.
Removing the Battery Pack
1
While pressing down the latches, remove the battery
pack.
Press the latches down in the direction of the arrows
as shown in the illustration.
Caution
When releasing the battery latches, be careful not to hurt your
fingers and nails.
Charging the Battery Pack
Cautions
The battery pack is rechargeable about 300 times. However, improper use such as overcharge or
over-discharge can shorten its service life.
The battery pack is a consumable item. Recharging the battery pack repeatedly will gradually reduce
the charge capacity and duration of its use.
If the transceiver is not used for a long period of time with the battery pack installed, deterioration of
the battery pack can accelerate.
If the transceiver is unused for a long period of time, be sure to store it with the battery pack removed.
When the transceiver and battery are stored for an extended period, install the battery pack biannually
and recharge the battery pack about 50% to prevent it from over-discharging.
Storing the battery pack in a high-temperature environment can accelerate deterioration. Store the
Be careful not to drop or strongly impact the battery pack. It can break.
Battery latches
Press down on the latches
in the direction of the arrow.
