Yaesu FT2DR, Руководство по эксплуатации

Страница: 138 / 173

138
C
u
s
to
m
iz
e
M
e
n
u
S
e
tti
n
g
s
fo
r I
n
d
iv
id
u
a
l U
s
e
(
S
e
t M
o
d
e
)
Set Mode: SIGNALING Menu Operations
Press and hold the key for over one second to display “SETUP MENU”, then touch
[SIGNALING] to set the individual items.
After completing the setup, press to exit from Set mode.
Notification of a Call from a Remote Station by the Bell
Set whether or not to alert you of a call from a remote station using the bell by selecting
[1 BELL] .
For details, see “Notification of a Call from a Remote Station by the Bell Function” on
page 114.
Selecting a DCS Code
Select the DCS code out of the 104 codes from 023 to 754 by selecting [2 DCS CODE] .
For more details, see “Setting the DCS Code” on page 112.
Transmitting and Receiving a DCS Code with an Inverted Phase
DCS INVERSION Function
The transmit and receive DCS code phase may be inverted when using the digital code
squelch function.
1
Touch [3 DCS INVERSION] .
2
Rotate the DIAL to select the phase combination for transmit/receive.
RX Homeomorphic / Both Phase / Inverted
Phase
TX Homeomorphic / Inverted Phase
Remark The default setting: Receive [Homeomorphic], Transmit [Homeomorphic]
Setting the Transmission Method of the DTMF Code
Set the transmission method of the registered DTMF code by selecting [4 DTMF MODE] .
For details, see “Transmitting the Registered DTMF Code” on page 104.